The 2 base pieces, b1
and b2, and also the ridge ought to be marked
off for that rafters simultaneously. The 3 are 10-feet lengths of
4 by 1 wood, unless of course you want the ridge to project a little, by which
situation you have to allow accordingly.
Stand the 3 pieces
together on edge, making the marks
having a square over the tops. Allow a distance of four ft between your
outdoors faces of r1 and r3 halve this distance to obtain the center of
r2 and subdivide the space between r3 and r6 to ensure that each rafter is
separated from the neighbors by the same space, which is 1 feet
11 inches.
Number the marks and
continue them lower the edges from the
boards using the square. There must be an indication on every side from the
spot to be occupied through the intermediate rafters, to avoid mistakes
for this is apparent when a rafter is bound around the left side of the
single ridge mark as well as on the best from the corresponding mark around the
base, the end result won’t be pleasing.
Free Chicken House Plans and Waterproofing
All of the woodwork should
now obtain a coating of well-steamed
tar, paint, creosote, as well as other preservative, labored well lower into
the cracks. Creosote and stoprot are most simple to use, because they
dry rapidly.
Comments are closed here.